Download stock firmware file for your Itel S11 Pro and repair your device. This firmware is in the scatter.txt format and can be flashed with SP Flash Tool or other MTK Flash Tools.
Download stock firmware file for your Itel S11 Pro and repair your device. This firmware is in the scatter.txt format and can be flashed with SP Flash Tool or other MTK Flash Tools.
Itel S11 Pro was announced on July 2018. It comes with 5.45-inch Full-Screen display with a resolution of 720 x 1440 pixels, 18:9 ratio (~282 ppi density). Itel S11 Pro is powered by Android 8.1 (Oreo) and comes with 2 GB RAM. As far as the cameras are concerned, the Itel S11 Pro has 8 MP, autofocus, LED flash primary camera on the rear and 8 MP 85° Wide Angle front shooter for selfies. Based on display size, processor and other hardware Itel S11 Pro comes with Non-removable Li-Ion 2400 mAh battery for better performance.
FLASHING REQUIREMENTS
- Android micro USB cable
- A Computer
- Android MTK USB drivers
- WinRAR
- SP flash tool
HOW TO FLASH
- Start by downloading and installing drivers in your Computer,
- Download WinRAR and installed if it isn't installed yet. It is required for extracting the firmware and all other archives,
- Download SP Flash Tool and extract to a work folder,
- Also, download the stock rom from the link below and extract to your work folder.
- Now launch SP flash tool and load firmware scatter text file,
- Make sure the device is off, select flashing mode("download, format all + download...)
- Start the flash option and connect your device to PC via USB.
- Wait for the flashing to complete.
PRECAUTIONS
To be on the safe side when flashing, or rather before flashing your ITEL S11 PRO, it is advisable that you make a backup of the current system. You can easily backup MTK firmware with NCK Android MTK, Miracle Box, etc...
Aucun commentaire:
Enregistrer un commentaire